Drager 67 38 801 A1B2E2K1 HG CO NO P3 D Rd 40 Screw Filter

Drager X-plore Rd40 (Screwed) Connection A1B2E2K1-Hg-CO-NO-P3 Combined Filter

Whether in the chemical industry, automotive, shipbuilding or metal industry, Drager X-plore Rd40 Coupled Filters are widely used with masks in all kinds of industrial applications. While providing protection against substances that threaten human health, it provides high performance and ease of use with low breathing resistance.

General features

Product Code: 6738801

Filter Code: A1B2E2K1-Hg-CO-NO-P3 D

Connection Feature: Rd40 (screw)

Filter Type: Combined Filters

Packaged hermetically.

Protected Substances: Gases and vapors of organic components (boiling point> 65 ° C), inorganic gases and vapors (chlorine, hydrogen sulphide, hydrocyanic acid, etc.), Sulfur dioxide, Hydrogen chloride, Ammonia, Mercury vapor, Carbon monoxide, nitrous gases including nitrogen monoxide, solid, liquid particles and powders

Conformity Norm: EN 14387: 2004 + A1: 2008 / EN 143: 2000 / A1: 2006 / CE approved

Compatible Mask Models: Drager X-plore 6300, 6530, 6570

Filter Feature: A1 – B2 – E2 – K1 – Hg – Co – No – P3

A1 Type Protection Factor: It is used for organic gas and vapor with a boiling point higher than 65 degrees. It is marked in brown on the filter. The most used chemicals are Benzene, Ethyl acetate, Cyclohexane, Ethanol, Xylene and its isomers, Toluene, 4-methyl-2-pentanol, n Hexane, Isooctane.

B2 Type Protection Factor: Used for gases and vapors of inorganic chemicals. It is marked in gray on the filter. The most used chemicals in this group are Chlorine, Phosgene, Hydrogen sulfide, Hydrocyanic Acid.

E2 Type Protection Factor: Used against sulfur dioxide and Hydrogen Chloride gas and vapors. It is marked in yellow on the filter.

K1 Type Protection Factor: Used against ammonia and organic ammonia derivatives. It is marked in green on the filter.

Hg Type Protection Factor: Provides protection against mercury vapor. It is marked in red on the filter.

Co Type Protection Factor: Provides protection against carmonoxide. It is marked in black on the filter.

No Type Protection Factor: Provides protection against Nitrogen Oxide.

P3 Type Protection Factor: Provides protection against dusts with a MAK (maximum allowable concentration) value of 0.1 mg / m3, toxic, carcinogenic and radioactive dusts.

RD 40 SCREW CONNECTION FILTER FEATURES

Experience comfort and safety with Dräger X-plore ® RD 40 Series respiratory protection Filters. This determines the comfort and usage criteria. The use of modern materials combined with an attractive design ensures maximum comfort.

Drager X-Plore RD 40 Filters. Compatible with 6300 Full Face Masks.

A1B2E2K1 Hg CO NO P3 Filter Features

A: Organic Vapors and Solvents

Aldehydes, Alcohols, Acetaldehyde, Acetaone, Acetonitrile, Benzene, (Benzol), Gasoline, Dioxane, Esters, Etonolamine, Ethers, Phenyl Hydrazine, Freon (Frigen), Ethylalcohol (Ethanol), Ethylacetate, Ethylfurlcarbonates, Ethylene oxide, Phenols , Iodomethane Isopropylalcohol, Carbontetrachloride, Kerosine, Ketones, Chloroform Methylbromide, Organic Vapors, Pentachloroethane, Perchlorethylene Pyridine, Propylene Alcohol, Solvents, TNT, Toluene (Toluol), etc.

B: Acid Gases and Vapors

Acidic gases, Arsin, Organic nitrogen compounds, Bromine, Diborane, Phosgene, Phosphine, Halogens, Hydrogen sulfide, Carbon disulfide, Chlorodioxane, Mercaptans, Sulfurylchloride, Linen Acetic acid, Formic acid, Hydrofluoric acid, Silane, Phosphortrichloride, etc. B2: Phosphortrichloride, Hydrogenatedurine, Iodine, Isocyanate, Chlorsulphonic acid, Sulfur monochloride, Hydrogenbromide, Ammoniumolysulphite, Chloramine, etc.

E: Sulfur Dioxide

Sulfur dioxide, Acetic acid, Formic acid, Hydrofluoric acid, etc.

E2: Acids (dense in fog), Hydrochloric acid, Sulfur compounds Sulfuric acid, Hydrogen bromide, Hydrogen chloride, etc.

K1: Ammonia

Ammonia, Phenylhydrazine, Pyridine, Hydrazine, etc

HG: Mercury compounds, Mercury vapors, etc.

CO: Carbon monoxide

NO P3: Nitric acid, Nitrogen oxides, fumes of nitrogenous compounds, etc.

Label Color Code: Brown – Gray – Yellow – Green – Red – Black – Blue – White

When the sealed tape and plug are opened, they should be discarded after a maximum of 6 months, even if not used.

All filters have CE mark in accordance with EN 14387 and / or EN 143: 2000.