Product Description
500w solar home system DIY Kit; Flexible 100w solar panel 3pcs;
complete solar system 12V Battery Charger
Package List
1, Flexible solar panel 100w, 5pcs; size: 1060MM*540MM*2.5MM.
2, 30A, 12V/24V Auto pwm solar charge controller; 1pcs
3, Y type solar cable 5 input 1 output; female and male; 1 set;
4, 3M Extension Solar Cable; red and black; 1 set;
5, 3M solar cable with Alligator clip; 1 set
Technician Specification | |
Length | 1050mm | Weight | 1.95 kg |
Width | 540 mm | Main material* | Mono crystalline |
Height | 2.5 mm | Frame material | ETFE+EVA+PET |
Electrical Specification
Performance Under Standard Test Conditions(STC*) | |
Maximum power | Pmax | 100 Wp |
Open circuit voltage | Voc | 20 V |
Maximum power point voltage | Vmpp | 18.02 V |
Short-circuit current | I sc | 5.95 A |
Maximum power point current | I mpp | 5.55 A |
Minor reduction in efficiency under partial load conditions at 25degC: at 100 W/m2, 95%- (+/-3%) of the STC efficiency (1000 W/m2) is achieved.
Component Material | |
Cells per module | 32 | Cell dimensions | 125mm*125mm |
Cell type | Monocrystalline Silicon | Front | ETFE FILM+EVA |
System Intergration Technician | |
Maximum system voltage SC II | 1000 V | Maximum reverse current | 10 A |
Maximum system voltage USA NEC | 600 V | Increased snowload acc. to IEC 61215 | 5.4 kN/msup2; |
Thermak Characteristics | |
NOCT | 47 degC | TC Voc | -0.33 %/degC |
TC Isc | 0.042 %/degC | TC Pmpp | -0.45 %/degC |
Extra Specification | |
PTC rating | 100 W | Module efficiency | 21.0% |
Junction box | IP67 | DOKIO Plus-Sorting* | Pflash ge Pmax |
Connector | MC4 | Power tolerance* | +/- 5 % |
PWM Solar Controller 30A 12V/24V Auto
——–Parameter
MODEL |
10A |
20A |
30A |
40A |
50A |
60A |
Battery Voltage |
12V 24V Auto |
|||||
Charging Current |
10A |
20A |
30A |
40A |
50A |
60A |
Discharging Current |
10A |
10A |
10A |
20A |
30A |
30A |
Max Solar input |
48V(for 24V battery) 24V(for 12V battery) |
|||||
Equalization |
14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) |
|||||
Float charge |
13.7V(defaul,adjustable) |
|||||
Discharge stop |
10.7V(defaul,adjustable) |
|||||
Discharge reconnect |
12.6V(defaul,adjustable) |
|||||
Charge reconnect |
13V |
|||||
Voltage of open light |
Solar Panel 8V(Light lights delay) |
|||||
Voltage of close light |
Solar Panel 8V(Light off delay) |
|||||
USB output |
5V/3A |
|||||
Self-consume |
<10mA |
|||||
Operating temperature |
-35°C~+60°C |
|||||
Size |
133.5*70*35mm |
188*90*47mm |
*all red color voltage X2 ,while using 24V system.
Connection
1.Connect the battery to the charge regulator – plus and minus.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
3M SOLAR CABLE WITH ALLIGATOR
3M SOLAR CABLE; RED+BLACK
n